Cattle Trailers for Sale in Columbus, Nebraska
Columbus is the seat of Platte County, where the Loup and Platte rivers meet in eastern Nebraska. Platte, Colfax, Butler, and Polk counties mix irrigated corn and soybeans with feedlots, hog and cattle operations, and many small farms with show and beef cattle.
Farmers here move cattle along US-30, US-81, and NE-15 to sale barns and 4-H shows throughout the region.
River-Valley Humidity and Winter Salt
Irrigated cropland raises summer humidity, and winter salt on US-30 and nearby highways sits on trailers all season. Paint is only as good as its weakest chip. Hot dip galvanizing protects every surface, and the laser-cut, tabbed-and-slotted fit makes for clean, consistent welds.
How Star Manufacturing Trailers Are Built
- 5/16" thick, 3x5 heavy angle frame — seam welded, not stitch welded, for a rigid frame that resists flexing and cracking
- Full hot dip galvanized finish — the entire trailer is submerged in molten zinc after fabrication, so every surface is protected
- Laser cut components — tabbed and slotted for a precision fit and consistent, tight welds
- Sizes from 14' to 40' — bumper-pull and gooseneck configurations for small farms up to commercial loads
Choosing a Size for Platte County Operations
| Length | Typical Use | Approx. Capacity (1,000 lb cattle) |
|---|---|---|
| 14'–16' | Small farms, show animals, calves | 4–6 head |
| 20'–24' | Cow-calf and dairy heifer hauling | 8–11 head |
| 28'–32' | Larger herds, hauling for neighbors | 12–15 head |
| 36'–40' | Commercial and multi-farm loads | 16–20 head |
Delivery to Columbus and Platte County
Columbus is roughly 990 miles and about 18 hours of driving from Wharton, TX. That's a long haul, but we deliver across the Plains regularly, and out-of-state delivery is routine — we quote freight and timing up front with your order.
We also serve buyers in nearby markets including Norfolk, NE, Grand Island, NE.
Frequently Asked Questions
What do 4-H families usually buy?
A 16'-20' trailer that's light enough to tow with a half-ton but heavy-duty built.
Where are trailers built?
Every one is built to order at our shop in Wharton, TX.
What makes a Star Manufacturing trailer different from a typical dealer-lot stock trailer?
Most stock trailers are painted, stitch-welded, and built from lighter tube. Ours use a 5/16" thick 3x5 heavy angle frame that is seam welded, laser-cut tabbed-and-slotted parts for a precise fit, and a full hot dip galvanized finish. You can spec length from 14' to 40' and see instant pricing in the quote builder before you ever call.
How long does a custom order take?
Every trailer is built to order in Wharton, TX. Call (979) 532-1486 for current lead times, and we will confirm delivery timing when you place the order.
Get a Quote
Configure your trailer and see instant pricing with our online quote builder, browse the full cattle trailer lineup, check out our utility construction trailers, or read more on our blog. Questions? Contact us or call (979) 532-1486. Star Manufacturing is located at 2507 County Rd 231, Wharton, TX 77488.